top of page
Asset 1_4x.png


Clean your surface using soap and water or isopropyl alcohol. Make sure the surface is dry before proceeding. If your walls are freshly painted, we recommend waiting 4–5 weeks for the paint to cure before applying decals. Tape the design to the surface with masking tape to make sure it's in the right spot. Use a level if necessary.


Peel back a corner of the design, begin transferring tape at a 45° angle. If some of the decals don't come free, press them down again and give them a quick scratch on the transfer tape side.
Once the backing is removed, the adhesive is exposed. Be careful not to fold the design over itself.
Press and fold a corner of the backing over, then rub the exposed section of the design onto the surface.


Apply the design to the surface using the rubbing technique described earlier. If the design is large, ask a friend to help you. Otherwise, you can apply it in one step by peeling or rolling the transfer tape away from the graphic at a 45° angle.

bottom of page